U-Line U-CLR2160S-40 Ice Maker User Manual


 
u-line.com 9
Removing and Installing Grille
WARNING
!
Disconnect electric power to the unit before removing
the grille.
WARNING
!
DO NOT touch the condenser fins (4). The condenser
fins are SHARP and can be easily damaged.
Removing the grille.
1. Disconnect power to the unit.
2. Loosen the two screws (1).
3. Remove grille (2) from unit.
Installing the grille:
1. Place the hook-hinge located on the rear bottom side of the
grille (2) onto the front lip of the unit base. Swing the grille up
into position.
2. Align cabinet and grill holes and secure, but do not overtighten
grille screws (1).
3. Reconnect power to the unit.
Typical Model Shown
Removing and Installing Door Shelves
For models equipped with door shelves:
To remove th e doo r sh elf:
1. Grasp shelf in center, and lift until the shelf notches (1) clear
the pins (2).
2. Carefully pull the shelf away from the door.
To install the door shelf:
1. Holding the shelf in the center, center the shelf in the door at
the desired location, slightly above the pins (2).
2. Lower the shelf onto the pins (2).
4
1
2
5
1
2