Filter
Top Products
INITIAL ADJUSTMENT (continued)
PREPARING THE GRIDDLE SURFACE
SEASONING STANDARD GRIDDLES
As manufactured, the steel surface of your Wells griddle has
microscopic pores. It is important to fill these pores with oil in order to
provide a hard, non-stick cooking surface.
a. Preheat the griddle surface to 375ºF (191ºC).
b. Spread a light film of cooking oil over the entire griddle surface
c. Allow the oil film to cook in for approximately 2 minutes, or until it
smokes.
d. Wipe the griddle surface with a clean damp cloth until all oil is re
moved.
e. For new griddles, repeat this procedure 2-3 times until the griddle
has a slick, clean surface.
CHROME PLATED GRIDDLES
Because the microscopic pores in the griddle surface are filled by the
chrome plating, no seasoning of the griddle surface is required.
a. Thoroughly clean the griddle surface using a soft clean cloth and
a small amount of mild detergent.
b. Rinse and dry thoroughly after cleaning.
c. The griddle is now ready to use.
IMPORTANT: SCRATCHES
WILL DAMAGE THE CHROME-
SURFACE!
DO NOT use anything on a
Chrome griddle that could
scratch the surface.
DO NOT clean chrome surface
with griddle bricks, pumice
stone or abrasive cleansers.
9
121 p/n 45324 OpManual Built-In Electric Griddles