Verilux VH01 Blender User Manual


  Open as PDF
of 16
 
13
Sanitizing Wand Troubleshooting
The Wand Will Not Turn On
1. Try turning on the Wand while it is connected to the AC adapter and
plugged in. If it works, the battery may not be charged or connected
properly.
2. Open battery compartment, disconnect battery clips for two seconds.
Re-connect clips; re-insert battery and cover. Try again.
No Blue Light Underneath
• Bulbmaybeloosefromshipping.
• Bulbmaybebrokenorotherwiseneedreplacing.
• BesuretheWandisfacingdownwarddirectlyoverthesurfacebeing
sanitized. If the Wand is not operated in this manner, the internal safety
switch will prevent the Wand from operating. This feature is to help prevent
direct exposure to UV-C Light. Use caution when operating the Wand and
do not attempt to override this product feature.
This this product should not be handled or used by children to
prevent accidental exposure to UV-C rays.
CAUTION:
 previous next