Filter
Top Products
UL approved
strain relief
d
Common
Green
Ground
White
Black
Run wires through bottom pan. Using a UL approved
strain relief, connect wires to terminal block.
e
Green
Ground
Connect ground wire.
NOTE: Reinstall front plate and bottom pan.
12 13
Hardwire Conduit Option
a
b
Remove any loose items in the dishwasher and carefully lay
the dishwasher on its back. NOTE: Be careful not to pinch
hoses or power cord beneath dishwasher.
Remove bottom pan and front plate.
c
Loosen ground wire and wires on terminal block.
Loosen strain relief and remove cord.
NOTE: Other items are grounded in this location–these
items must remain grounded.
Trim Installation Options (not available on all units)
1a
To install dishwasher without trim, remove the 6 screws (3 per side) and
r
emove trim. To attach wiper gasket to dishwasher, pull protective film off
adhesive back on wiper gaskets and apply to leading edge of dishwasher
frame. Trim gasket to fit.
1b