Filter
Top Products
Dimensions & Cutout Dimensions
6 7
2
3
-
7
/
8
”
(
6
0
.
6
c
m
)
2
8
-
3
/
4
”
(
7
3
.
0
c
m
)
3
3
-
7
/
8
”
(
8
6
.
0
c
m
)
4
9
”
(
1
2
4
.
5
c
m
)
26-3/8”
23-3/4”
2-5/8”
26-3/8”
23-1/8”
3-3/16”
Cabinet Flush
Panel Flush
26-3/8”
23-1/8”
2-7/8”
26-3/8”
23-3/4”
2-1/4”
Panel FlushCabinet Flush
23-1/8”
23-3/4”
Panel FlushCabinet Flush
Designer Series
Professional Series
Custom Panel (200/450E Models)
2
4
”
(
6
1
.
0
c
m
)
2
4
”
(
6
1
.
0
c
m
)
3
4
”
mi
n
.
(
8
6
.
4
c
m
)
3
5
”
m
a
x
.
(
8
9
.
0
c
m
)
Note: A 2”
(5.1 cm) cut-out is
required for
water supply and
discharge lines.
(
59.0 cm)
(60.3 cm)
(6.7 cm)
(8.1 cm)
(
67.0 cm)
(
67.0 cm)
(67.0 cm)
(60.3 cm)
(60.3 cm)
(67.0 cm)
(59.0 cm)
(7.3 cm)
(5.7 cm)
(59.0 cm)
Specifications
Built-In Dishwasher
Description
200/325E/450E Models
Overall width
23-7/8” (60.6 cm)
Overall height from floor
33-7/8” (86.0 cm) min. to 35” (89.0 cm) max.
Overall depth from rear–Professional
To edge of side - 24” (61.0 cm) - includes door panel
With door open - 49” (124.5 cm)
Overall depth from rear–Designer
To edge of side - 24” (61.0 cm) - includes door panel
With door open - 49” (124.5 cm)
Cutout width
24” (61.0 cm)
Cutout height
34” (86.4 cm) min. to 35” (89.0 cm) max.
Cutout depth
24” (61.0 cm)
Electrical requirements
200 Model:
15.0 amps, 120VAC/60 Hz;
Power cord must be
purchased separately.
325E/450E Models:
15.0 amps, 120VAC/60 Hz;
3’9” (1.1 m) electrical cord
3 prong plug supplied
with unit.
Water-heating element rating
200/325E/450E models - 1200 watts
Inlet water temperature
200 Model:
120°F (49°C) required
325E/450E Models:
120°F (49°C) recommended;
Dishwasher will perform properly with cold water
Note: Cycle times will vary
Inlet water pressure operating range
10 to 125 psi (.69 to 8.62 bar)
Inlet water hose
5’
(1.5 m) braided stainless steel water line with 3/8” (0.95 cm) compression
fitting connected to dishwasher
Drain hose
7’ (2.13 m) 1/2” (1.3 cm) ID “crimp-proof” flexible drain hose attached to
dishwasher, connections provided for 5/8” (1.6 cm),
3/4” (1.9 cm) or
1” (2.5 cm), cut as required
Drain hose high loop required
Height from floor - 20” (51.0 cm) min.
Approximate shipping weight
200 model - 147 lbs.
(66.7 kg)
325E model - 152 lbs.
(68.9 kg)
450E model - 157 lbs.
(71.2 kg)