Filter
Top Products
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
VENTILATION
Built-In Classic Chimney Wall Hood—
Standard, w/Ledge, & Ledgeless
Recommended Ventilator Kits
• See Installation Requirements table for recommendations for each hood model
• One ventilator, one duct run for any size hood/ventilator
• A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
Duct Cover Extensions
• For use with DCWH, DCWL, & DCWN hoods
• Extends height of hood by up to 12” (for 10’ ceilings)
• Replaces adjustable duct cover supplied with hood
• Specify finish code following accessory model number (for example, DCCE1010-SS)
• Available in Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG)
Backsplashes
• Stainless Steel (SS)
• 30”H.
• Backsplashes protect the wall space below hood
• Create a continuous finish between cooking surface and hood
• Low maintenance, easy to clean
• Hemmed edges with screw holes
• Kit includes backsplash and fastening screws
✪
Installation Notes & Accessories
Kit model Description Hood models Approx. ship wt. lbs. (kg)
DIV300 300 CFM interior-power DCWH3042/3644, DCWL3342/3944, & 15 (6.8)
DCWN3042/3644
DIV440 440 CFM interior-power DCWH3042, DCWL3342, & DCWN3042 25 (11.3)
DIV600 600 CFM interior-power DCWH3644/4244, DCWL3944/4544, & 27 (12.2)
DCWN3644/4244
DIV1200 1,200 CFM interior-power DCWH4844, DCWN5144, & DCWN4844 43 (19.4)
DEV900 900 CFM exterior-power DCWH3042/3642/4244, DCWL3342/3944/4544, & 39 (17.6)
DCWN3042/3644/4244
DEV1200 1,200 CFM exterior-power DCWH3042/3644/4244/4844, DCWL3342/3944/ 53 (23.9)
4544/5144, & DCWN3042/3644/4244/4844
DEV1500 1,500 CFM exterior-power DCWH4844, DCWL5144, & DCWN4844 47 (21.3)
Model Description Approx. ship wt. lbs. (kg)
DCCE1010 Duct cover extension (for 30” & 33”W. hoods—10”W. x 12”D. x 30” – 42”H.) 4 (1.8)
DCCE1210 Duct cover extension (for 30”, 39”, 42”, & 45”W. hoods—12”W. x 12”D. x 28” – 40”H.) 6 (2.7)
DCCE1810 Duct cover extension (for 48” & 51”W. hoods—18”W. x 12”D. x 28” – 40”H.) 8 (3.6)
Model Description Approx. ship wt. lbs. (kg)
BKS30 30”W. backsplash 7 (3.2)
BKS36 36”W. backsplash 9 (4.1
BKS42 42”W. backsplash 12 (5.4)
BKS48 48”W. backsplash 14 (6.3)
BKS54 54”W. backsplash 17 (7.7)