Viking DDFB364 Freezer User Manual


 
REFRIGERATION
Built-In 36”W. All Freezer
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
71-
1/2”
Profession
a
l
(182.9 cm)
72”
Designer/C
ust
om
Front
(182.9 cm)
24”*
(61.0 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2
(26
.7 cm
)
5/8”
(1.5 cm
)
10-3/4”
(27
.
3
cm)
3
-
5
/8”
(9
.2 cm
)
O
p
tio
nal
f
l
o
or
water li
n
e en
try
1”
(2.5 cm
)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
65-
1/2”
Professiona
l
(166.4 c
m
)
66” D
esigner/Cu
s
tom Front
(167.6 cm)
24”*
(61.0 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1
.5 cm)
5/8”
(1.5 cm)
1
0
-1/2”
(
26.7 cm
)
5/
8”
(
1.5 cm)
1
0-
3
/4
(
27
.
3 c
m
)
3-5
/8”
(9.2 cm
)
Optional
f
l
o
o
r
water
line
entry
1”
(2.5 c
m
)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
Installation Requirements
VCFB364/VCRB364 DDFB364/DDRB364 DFFB364/DFRB364
Cutout width 71-1/2” (181.6 cm) 72” (182.9 cm) 72” (182.9 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
VCFB364/VCRB304 DDFB364/DDRB304 DFFB364/DFRB304
Cutout width 65-1/2” (166.4 cm) 66” (167.6 cm) 66” (167.6 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
36”/30” FREEZER/
REFRIGERATOR COMBINATION
36”/36” FREEZER/
REFRIGERATOR COMBINATION
ELECTRIC OUTLET LOCATION
WATER LINE ENTRY AREA
Note:
cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right
ELECTRIC OUTLET LOCATION
WATER LINE ENTRY AREA
Note:
cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right
ACCESS REQUIREMENTS – Dual Installation
*Custom front models fit flush in 25”-deep (63.5 cm) cabinet openings. They can be installed in standard 24”-deep openings. The
door faces and top grille will protrude 3/4” (1.9 cm) into the room.