Filter
Top Products
1716
Product Controls
Product Controls
Settings and Functions
To activate the max refrigerator mode, simply press the
”ACTIVATE CONTROLS” pad, followed by the “MAX REF”
pad. The indicator light will glow to let you know you've
turned on the max refrigerator mode.
To deactivate the max refrigerator mode before the end of
the four hour cycle, press the ”ACTIVATE CONTROLS” pad,
followed by the “MAX REF” pad.
Max Freezer Mode
Max freezer mode adjusts the freezer temperature to the
coldest setting for 4 hours, at the end of which, the freezer
temperature automatically returns to its previous setting.
To activate the max freezer mode, press the ”ACTIVATE
CONTROLS” pad, followed by the “MAX FRZ” pad. The
indicator light will glow to let you know you have turned on
the max freezer mode.
To deactivate the max freezer mode before the end of the 24
hours cycle, simply press the ”ACTIVATE CONTROLS” pad,
followed by the “MAX FRZ” pad.
Door Open Alarm
Door open alarm sounds and an indicator light blinks if either
door is left open for more than three minutes.
To deactivate the door open alarm, press the “ALARM OFF”
pad or close the door that is open.
High Temperature Alarm
High temperature alarm sounds and an indicator light glows if
the refrigerator or the freezer temperature is too high for two
hours. A blinking light signals which part of the appliance is
affected. The alarm will end when the temperature is brought
back to a proper setting.
To deactivate the high temperature alarm, press the “ALARM
OFF” pad.
Thermistor Alarm
Thermistor alarm is a special feature that electronically senses
temperature problems. The thermistor alarm will sound and
indicator lights will scroll if the thermistor is not operating
properly. The alarm can be deactivated by pressing the “ALARM
OFF” pad on your refrigerator's control panel.
If the alarm
continues to sound, contact an authorized Viking Range
Corporation technician immediately.
Display Lights
To activate temperature display lights, press the ”ACTIVATE
CONTROLS” pad.
To deactivate temperature display lights, press the ”ACTIVATE
CONTROLS” pad, followed by the “DISPLAY OFF” pad.
Sabbath Mode
Sabbath mode is used to disable interior lights and alarms for
observance of the Sabbath.
Before the Sabbath mode is engaged, the bale arm of the ice
maker needs to be raised until it clicks into the detent. This
turns off the power to the ice maker.
To enter Sabbath mode, press the ”ACTIVATE CONTROLS”
pad to activate the control panel. Then, press and hold
“ACTIVATE CONTROLS” and “DISPLAY OFF” pads
simultaneously for three seconds. It will beep three times and
light the three right blue
squares so you will know that you
have activated Sabbath mode.
When your refrigerator is in Sabbath mode, interior lights,
display (excluding the three right
hand side lit blue squares), and
alarms are disabled.
If your refrigerator loses power while in Sabbath mode, it will
return to the Sabbath mode when power is reestablished.
To exit the Sabbath mode, press the ”ACTIVATE CONTROLS”
pad. Then, press and hold “ACTIVATE CONTROLS” and
“DISPLAY OFF” pads simultaneously for three seconds. You
will then hear three
beeps letting you know that you have
turned the Sabbath mode off.
Settings and Functions