Viking DTWS Ventilation Hood User Manual


 
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
VENTILATION
Designer Built-In Wall Hoods
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
Ventilator Kits
See Installation Requirements table for recommendations for each hood model
A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill
Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
Duct Covers
DCW for DTWN models
o 12”H./12”D.
o Extend height of hood by 12”; conceal duct
Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG).
o When ordering, specify finish code following accessory model number (for example, DCSB3008-SS)
Duct Cover Extensions
For use with DTWS Slim Traditional Wall Hoods
Extends height of hood by up to 12” (for 10’ ceilings)
Replaces adjustable duct cover supplied with hood
Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG).
o Specify finish code following accessory model number (for example, DCCE1010-SS)
Installation Notes & Accessories
Kit model Description Hood models Approx. ship wt. lbs. (kg)
DIV300 300 CFM interior power DTWS3049/3649 15 (6.8)
DIV440 440 CFM interior power DTWS3049/3649/4249 25 (11.3)
DIV880 880 CFM interior power DTWS4849 36 (16.2)
DEV900 900 CFM exterior power DTWS3049/3649/4249 39 (17.6)
DEV1200 1200 CFM exterior power DTWS3649/4249/4849 53 (23.9)
DEV1500 1500 CFM exterior power DTWS4849 47 (21.3)
VIV300 300 CFM interior power DTWN3048/3648 27 (12.2)
VIV600 600 CFM interior power DTWN3048/3648/4248 27 (12.2)
VIV1200 1200 CFM interior power DTWN3048/3648/4248/4848 43 (19.4)
VEV900 900 CFM exterior power DTWN3048/3648/4248 39 (17.6)
VEV1200 1200 CFM exterior power DTWN3048/3648/4248/4848 53 (23.9)
VEV1500 1500 CFM exterior power DTWN4848 47 (21.3)
Model Description Approx. ship wt. lbs. (kg)
DCW30 Duct cover for 30”W. DTWN 10 (4.5)
DCW36 Duct cover for 36”W. DTWN 11 (5.0)
DCW42 Duct cover for 42”W. DTWN 13 (5.9)
DCW48 Duct cover for 48”W. DTWN 14 (6.3)
Model Description Approx. ship wt. lbs. (kg)
DCCE1010 Duct cover extension (for 30”W. DTWS hood) 4 (1.8)
DCCE1210 Duct cover extension (for 36” & 42”W. DTWS hoods) 6 (2.7)
DCCE2010 Duct cover extension (for 48”W. DTWS hood) 9 (4.1)