Filter
Top Products
Features: Cycles
Product Controls
13
Features: Cycles
Product Controls
12
Cycles Options
200 Model
Wash Cycles
POTS/PANS
Heavily soiled pots, pans and casserole dishes. Long heated prewash
loosens up encrusted food. High temperature main wash and final rinse.
NORMAL WASH
Normally soiled plates, glasses, bowls, and lightly soiled pots and pans.
ECONO/CHINA
Normally soiled dishware, china and crystal. Lower temperature wash cycle.
RINSE/HOLD
All dishware. Short rinse with no heat.
Options
HI TEMP WASH
Increases the temperature of the main wash and final rinse portions of
the cycle. May add extra water for improved cleaning performance.
Available on Pots/Pans and Normal cycles.
DELAY START
Lets you delay running the dishwasher for up to 4 hours. To set “DELAY
START”, select the desired wash cycle and option(s). Press the “DELAY
START” button once and the number “2” will light, indicating a two hour
delay. If you desire a longer delay, continue pressing the “DELAY
START” button to a 4 hour delay. The corresponding number on the
button will light. Once you have set the desired delay time, press the
“START” button and close the door. “DELAY START” is not available
with the Rinse/Hold cycle.
AUDIBLE SOUND SIGNAL
A single beep will occur when you select cycles, options and press the
“START” key. The end-of-cycle signal consists of 2 long beeps. If the
“START” button is not pressed or if the door is not closed within 4
seconds of pressing the “START” button, 3 short beeps will occur. For
all other error messages and to deselect the audible sound signal, see
the Troubleshooting/Fault Codes section.