Viking F20701A EN (040711) Range User Manual


  Open as PDF
of 4
 
54
Installing Flush Mount Trim
Installing Flush Mount Trim
After removing the existing side pieces, install the flush mount trim pieces to the oven.
1. Remove the protective plastic from the flush mount trim pieces.
2. Install the two flush mount trim pieces to the oven (see diagram).
3. For Professional ovens, install the top and bottom trim pieces (see diagram).
NOTE: Only Professional model ovens will require a top and bottom flush mount trim
piece.
NOTE: There will be a designated right and left hand side flush mount trim piece. Install
the corresponding trim piece on the correct side, as they are not interchangeable.
4. After installing the flush mount trim pieces, the oven can be installed in the cutout.
DDOE
Double Oven
VESO
Single Oven
 previous