Filter
Top Products
51
50
Remove 2 additional screws under
top section of bezel.
Remove mounting support.
Grasping the bezel on both sides, pull away
from the door cavity.
Note: Bezel needs to be pulled from the bottom
first and then pull slightly downward to clear
the water dispensing tube.
Store bezel and spill tray in safe and secure place
until installation.
5
6
7
38
Remove handle side cabinet screws
and trim with a phillips screwdriver.
Remove all screws from handle side door trim.
Remove two screws from top and bottom door trim.
Remove handle side door trim.
Remove bracket.
Measure and mark the first hole for each bracket.
Push custom wood panel onto door.
1
x13
2
x13
x2
x2
3
2-1/16”
(5.2 cm)
2-1/16”
(5.2 cm)
Back of panelBack of panel
FOL bracketFOL bracket“Z” bracket“Z” bracket
1-11/16”
(4.3 cm)
1-11/16”
(4.3 cm)
2-13/16”
(7.1cm)
Bottom-mount
12-1/16”
(30.6cm)
All Refrigerator/
Freezer/
Side-by-side
2-13/16”
(7.1cm)
Bottom-mount
12-1/16”
(30.6cm)
All Refrigerator/
Freezer/
Side-by-side
2-1/8”
(5.4 cm)
2-1/8”
(5.4 cm)
2-1/8”
(5.4 cm)
4
5
x13
x13SxS,AFAR
x12BTM
6
Custom Door Panel Installation (Refrigerator or Freezer)
Attach “Z” bracket to the hinge side of custom panel.
Attach bracket to the handle side of custom panel.
Ice and Water Dispenser Bezel Removal (if required cont.)