Filter
Top Products
REFRIGERATION
Built-In 30”W. All Freezer
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
65-
1/2”
P
rofession
a
l
(166.4 c
m
)
66” Designer/C
usto
m
Front
(167.6 cm)
24”*
(61.0 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3
”
(7.6 c
m)
5/8”
(1.5 c
m)
5
/8”
(1.5 cm)
10-1/
2
”
(
26
.
7
cm)
5
/
8”
(
1.5 cm)
10-3/4”
(27
.3 cm)
3-
5
/
8
”
(9.2
cm
)
O
pt
ional floor
w
a
t
er line ent
ry
1”
(2.5 cm
)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
9”
(22.9 c
m)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
59-
1/2”
Profession
a
l
(151.1
cm)
60” Designer/C
ustom
Front
(152.4 cm)
24”*
(61.0 cm)
6-3/4”
(
17.1
cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.
5 cm)
10-1/
2
”
(
26.7 c
m)
5/8”
(
1.
5
cm)
10-3/4”
(27.3 cm
)
3-5/8”
(
9.2 cm
)
Op
tio
nal flo
or
water line
entry
1”
(2.5 cm
)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
Installation Requirements
VCFB304/VCRB364 DDFB304/DDRB364 DFFB304/DFRB364
Cutout width 65-1/2” (166.4 cm) 66” (167.6 cm) 66” (167.6 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
VCFB304/VCRB304 DDFB304/DDRB304 DFFB304/DFRB304
Cutout width 59-1/2” (151.1 cm) 60” (152.4 cm) 60” (152.4 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
30”/30” FREEZER/
REFRIGERATOR COMBINATION
30”/36” FREEZER/
REFRIGERATOR COMBINATION
ELECTRIC OUTLET LOCATION
WATER LINE ENTRY AREA
Note:
cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right
ELECTRIC OUTLET LOCATION
WATER LINE ENTRY AREA
Note:
cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right
ACCESS REQUIREMENTS – Dual Installation
*Custom front models fit flush in 25”-deep (63.5 cm) cabinet openings. They can be installed in standard 24”-deep openings. The
door faces and top grille will protrude 3/4” (1.9 cm) into the room.