Viking VEDO130BK Oven User Manual


 
1716
Electronic Timing Center
Digital Display
(Select Models)
The Electronic Timing Center is
used to program and control all
timing functions. It has five
display and programming modes that are activated by the four
push buttons and the “SET” knob. Both the Bake Hours mode and
the Min/Sec Timer mode can be used to time cooking periods.
These features can even be used at the same time when both ovens
are in use. However, only Bake Hours and Self-Cleaning modes
shut the oven off automatically when the timed program is over.
For example, you can time bake a casserole in the upper oven using
the Bake Hours mode, while broiling in the lower oven using the
Min/Sec Timer. One oven can also be cleaned while timing foods
in the other oven using the Min/Sec Timer.
Setting the Min/Sec Timer
The Min/Sec Timer is designed for accurate timing and is ideal for
baking delicate items such as biscuits, cookies, and popovers, and
for precise broiling. The Min/Sec Timer can be used at the same
time the Bake Hours or Start Time functions are in use. It can be
used for timing up to 24 hours. When setting the timer, the time
displayed will increase in 1 minute increments. When the timer
counts down to 1 minute, the timer alarm will give two short beeps
and the display changes from hours:minutes to seconds only.
To program the Min/Sec Timer
1. Press the “MIN/SEC TIMER” button. The timer will display :00
and the word TIMER will be displayed in the lower right corner.
2. Turn the “SET” knob until the desired duration time is displayed.
The Min/Sec Timer is now programmed. The alarm will sound at the
end of the countdown. The program can be cancelled anytime by
setting the remaining time to :00. To change back to the time-of-
day, press the “CLOCK” button. Notice that a small clock will be
displayed in the upper right corner to indicate that a program is in
progress. The display will return automatically to the Min/Sec Timer
after a few seconds.
Timer Alarm
At the end of a Min/Sec Timer program or Bake Hours program,
the alarm will consist of three beeps followed by two beeps every
10 seconds until the “MIN/SEC TIMER” button is pressed.
Whenever a valid function key is pressed or when a control function
starts automatically, one beep will be sounded. When an invalid
function key is pressed, two beeps will be sounded.
Setting the Automatic Start Time Bake Program
The Bake Hours and Start Time modes of the timer can be used to
automatically turn the oven on and off at a preselected time. The
Automatic Time Bake program is ideal for foods with no danger of
spoilage during the time the oven is left off.
To Set The Automatic Time Bake Program:
1. Set the start time:
A) For Single Ovens – Program the start time by pressing the
“START TIME” button and turning the “SET” knob until the
desired start time is displayed. This is the time of day you want
the food to begin cooking.
B) For Double Ovens – Press the “START TIME” button once
to set the starting time for the upper oven (UPPER OVEN will
show on the display). Press the “START TIME” button twice to
set the starting time for the lower oven (LOWER OVEN
will show on the display). Then program the start time by
turning the “SET” knob until the desired start time is
displayed. This is the time of day you want the food to
begin cooking.
2. Set the desired baking time:
Once the start time is set, the display will switch to :00 and
the words SET, COOK and TIME will appear on the right side
of the display. You will now enter the desired baking time.
Turn the “SET” knob until the desired baking time is displayed
in hours and minutes. Once the desired bake time is set, the
word SET will disappear and the word DELAY will appear in
the display indicating that the Bake Hours program has been
set.
NOTE: For Double Ovens, the word DELAY will show with either
UPPER OVEN or LOWER OVEN depending on which oven has
been selected.
SET
M
IN/SEC
T
IMER
B
AKE
T
IME
S
TART
T
IME
C
LOCK
Product Controls
Product Controls
Clocks and Timers (Digital Display)
Clocks and Timers (Digital Display)