Viking VESO5302LE Oven User Manual


 
4342
Product Care
Product Care
Cleaning and Maintenance
Replacing Interior Halogen Oven Lights
Do not touch bulb with bare hands. Clean off any signs of oil
from the bulb and handle with a soft cloth.
Power Failure
Do not attempt to use during a power failure. Unit will not
function.
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BEFORE REPLACING BULB.
1. Unsnap glass light cover
using a screwdriver in the
access groove.
2. Firmly grasp light bulb and
pull out.
3. Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
4. Replace the light cover by
snapping glass cover onto
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
access
groove
light
bulb
glass light
cover
PROBLEM POSSIBLE CAUSE AND/OR REMEDY
1. Oven will not function. Oven is not connected to electrical power.
Have electrician check power circuit breaker,
wiring and fuses.
2. Oven does not Door is not shut tight enough for
operate in self-clean. automatic door latch to lock.
3. Oven is not clean Temperature control knob not rotated all
after self-clean cycle. the way past clean until it stops.
4. Broil does not work. Temperature control knob is rotated too
far past broil position.
5. Door will not open. Oven is still in self-clean mode. If oven is
hot, door latch will release when a safe
temperature is reached.
6. Oven light will not work. Light bulb is burned out.
Oven is not connected to power.
Trouble Shooting Guide