Filter
Top Products
-Remove the rack spacers on each side, one by one, starting from the
bottom and
proceeding to the top.
-Remove the four black metal grids one by one.
-Remove spacers from bottom of unit.
Page 1 of 2
DISASSEMBLY/ASSEMBLY INSTRUCTIONS FOR
YOUR PERSONAL WINECELLAR
7. Carefully tilt
the unit back and place’on cardboard packing or padding so as to
not damage the cabinet.
8. With the 4mm Hex Wrench, careftilly remove bolts on side of cabinet and
place side on cardboard.
9. Having someone holding the top and bottom ends, remove bolts on other side.
Place the side on cardboard.
10. Remove the bolts at top of unit. Place top on cardboard.
Now your winecellar is ready to be carefully moved into its final destination.
ASSEMBLY
INSTRUCTIONS
1. Install the casters all the way in on the bottom piece first.
2. To assemble our unit follow the disassembly instructions in reverse.
3. If doors appear not to be aligned, level the cellar as best possible by screwing the
casters back out slowly checking alignment with each adjustment.
4. The unit can be moved to your desired location, being sure to allow 5 to 6 inches
of clearance from the back of winecellar to the wall.
5. Your unit is now ready. to plug into a dedicated 110/115 volt outlet for your
winecellar. We recommend that you do not plug your winecellar into an outlet
used for other electronic items in addition to the winecellar.
Page 2 of 2