Filter
Top Products
REVERSAL OF DOOR SWING
This wine cellar is built with a reversible door. You have the choice of
either opening it from the left or the right side. In order to reverse the
opening direction of your door, please follow these simple instructions.
CAUTION: To avoid personal injury to yourself and/or property,
we recommend someone assist you during the door reversal
process.
1. Remove the top hinge assembly and
keep for later use.
2. Remove the plug buttons from the
left holes on the top of the cabinet
and transfer them to the uncovered
holes at the right side. Be sure to
press the plug buttons firmly into
the holes.
3. Remove the door assembly and keep
for later use.
4. Remove the right bottom hinge and
left bottom hinge and install them on
the opposite sides.
5. Re-install the door assembly with
the door handle on the opposite side
(rotating the door 180°). Make sure
the door assembly is properly
aligned on the cabinet.
6. Re-install the top hinge assembly
previously removed in step 1 on the
opposite side and tighten all
necessary screws.
Note: 1. It is recommended to change the door swing before installation.
2. Please remember, do not power up the unit for 48 hours after
cabinet has been out of an upright position to allow the coolants
to settle inside the compressor.
3. Always unplug and empty the wine cellar before reversing door
and secure any loose items (shelves) for safety.
10
WWW.VINOTEMP.COM
SN32EL06-S8