10
W W W . V I N O T E M P . C O M
PROBLEMS WITH YOUR WINE CELLAR
You can easily solve many common wine cellar problems, saving you
the cost of a possible service call. Try the suggestions below to see if
you can solve the problem before contacting Vinotemp at
info@vinotemp.com.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Wine cellar does
not operate
• Not plugged in
• Using wrong voltage
• The circuit breaker tripped or a fuse is blown
Wine cellar is not
cold enough
• Check the temperature control setting as
external environment may require a higher
setting
• The door is opened too often
• The door is not closed completely
• The door seal does not seal properly
• The wine cellar does not have the correct
clearances to operate efficiently, safely and
correctly
Light does not
work
• Call the service center
Vibrations • Check to assure that the wine cellar is level
Wine cellar seems
to make too much
noise
• The wine cellar is not level
• Check the fans inside and at the back of unit
Door will not close
properly
• The wine cellar is not level
• The doors were not properly installed
• The seal is weak
• The shelves are out of position
Temperature LED
display is blank
• Main control board does not work
• The Power Control Board is not functioning
• There is some problem with the plug (no
power supply)
Temperature LED
display error
• Display has suffered too much wear and tear
• Temperature sensor has been cut off
Buttons are not
functional
• Temperature controller panel is damaged