Vinotemp VT-6TED-WB Refrigerator User Manual


 
8
W W W . V I N O T E M P . C O M
ELECTRICAL CONNECTION
For your protection, this unit is equipped with a 2-conductor cord set
that has a molded 2-pin plug, and should be used in combination with
a properly connected grounding-type outlet.
It is not recommended to use this cellar with an extension cord or
power board. Please ensure that the appliance is plugged directly
into the electrical outlet.
INSTALLATION NOTES
Before Using Your Wine Cooler:
Do not place the wine cooler under direct sunlight, in a hot area
(i.e. above 80°F) or in a humid place.
Make sure your wine cooler is resting on a flat surface so that
there is no risk of bottles being able to tip forward.
Remove all exterior and interior packaging, including protective
foam on the door panels. Remember that children are particularly
vulnerable to packaging materials and old appliances so discard
materials with this in mind.
Your wine cooler needs adequate space around the contents
inside for it to function properly. It is very important that you give
it 2 inches of space between the wine bottles and the inner wall
surfaces, behind, and to the sides. This is necessary so that your
wine cooler has adequate space for ventilation.
Installation Instructions
Installation instructions are located on the back of the wall mount
paper.