Vita-Mix BarBos MP Blender User Manual


 
NOTE: To make new lids easier to insert and remove, rub a light coating of cooking oil
around bottom where it seals. Place it in container for several minutes, remove and
lightly wipe oil off lid.
4
8
16
24
32
40
48
OUNCES
Figure B
5
Two-Part Lid
32 oz. (900 ml) Xtreme Performance Container
The two part lid is easy to clean and easy to put
on, take off and seal.
• To remove a fully latched lid, lift the two
tabs and pull upward and off.
• Twist the center lid plug to fasten or
remove.
NOTE: Older 48 oz. (1.4 L) and 64 oz. (2.0 L)
Vita-Mix container will work on the BarBoss or
Drink Machine MP. The Xtreme Performance
Containers will not work on older Vita-Mix
Machines. Call Vita-Mix or your distributor for
more information.
One Piece Lid
(optional)
32 oz. (900 ml) Xtreme Performance Container
The one piece lid is easy to clean and easy to put
on, and take off and seal.
• There is no lid plug for this lid.
• Add ingredients through port on top.
4
8
16
24
3
2
40
48
OUNCES
Lift lid tabs
to remove lid
To secure lid plug, rotate it so one
tab locks between the stops on top
of rubber lid
Figure
A
NOTE: Outside the United States and Canada, your machine may come with a different
container configuration.