Vulcan Technology VRH88 Double Oven User Manual


 
VRH SERIES OVENS F-41207 (04-14)
8
6. Check that the Holding
Temperature Indicator Light is
illuminated.
Each Oven is equipped with cooling
fans. The cooling fans may not operate
when the oven is first turned on. The
cooling fans operate only when the
thermostat, to which they are
connected, requires it.
7. Set the COOKING TIME knob
to 2 hours. The Holding
Temperature Indicator Light will
go out and the Cooking
Temperature Indicator Light will
illuminate.
8. Turn the COOKING TEMP-
ERATURE knob to 250 F.
Check the interior rear of the
oven cavity to determine that the
oven is heating.
9. Turn the COOKING TIME KNOB
to 0 and set the HOLDING
TEMPERATURE knob at 250 F.
10. Check that the Cooking
Temperature Indicator Light has
gone out and the Holding
Temperature Indicator Light has
illuminated.
11. Check the interior rear of the
oven to ensure that the oven is
heating. If all the functions
perform satisfactorily, the oven is
ready for operation.
OPERATING INSTRUCTIONS
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
1. Turn Cooking temperature
knob to desired Cooking
temperature.
2. Set Cooking timer knob(s) to
desired cooking time to include
30 to 60 minute preheat time.
3. Turn Holding Temperature knob
to desired holding temperature.
4. Turn On/Off Switch to ON
position. On/Off indicator Light
and Holding Temperature Light
will illuminate.
When the oven reaches the desired
cooking temperature it is ready for use.
Keep the oven door closed during the
preheating cycle.