Vulcan-Hart 160L Range User Manual


 
— 20 —
3. After pilot is lit, turn the thermostat to the desired setting.
Nightly Shutdown: Turn oven thermostat OFF.
Complete Shutdown
1. Turn oven thermostat OFF.
2. Turn main gas supply OFF.
Standard Oven with Spark Ignition (Fig. 17)
1. Move toggle switch to ON position. Oven On Light will illuminate. The oven pilot will automatically light.
2. Once the oven pilot is established, the oven READY light will illuminate.
3. Set oven thermostat to desired temperature.
Nightly Shutdown: Push toggle switch to OFF position.
Complete Shutdown
1. Push toggle switch to OFF position.
2. Turn main gas supply OFF.
Fig. 17
Convection (Snorkel
®
) Oven (90 Series Only)
Light open top/griddle pilots before lighting oven pilot.
1. Open the kick panel and lift up the pilot lighting hole cover (see Fig. 15).
2. Turn red gas valve ON (located behind the kick panel), purging the gas line of all air (Fig. 18). Turn gas valve
and power switch OFF. Close oven door.
3. Light oven pilot by depressing the reset button (Fig. 19) and, using a taper, ignite the pilot. Hold reset button
in for 30 seconds or until pilot remains lit. Turn gas valve ON.
OVEN "READY"
LIGHT
OVEN "ON"
LIGHT
THERMOSTAT
TOGGLE
SWITCH
PL-53531