Filter
Top Products
GBD_GBDF SERIES GAS FRYERS
VULCAN-HART F-32934 Rev. B (June 2008)
-13-
Solid State Knob Control
Temperature Knob Control Melt Switch
Power Switch Filter Switch
(for those models with KleenScreen PLUS®
Filter Systems)
Start Button
TURNING ON THE FRYER
Open the door to the fryer. Select Liquid or Solid Shortening pressing the switch to
the desired selection.
Set temperature by turning the knob to the desired temperature.
Press the power switch to the ON position. The burners will not light until the next
step is completed.
Press the START switch once for the burners to light. The START switch is a
momentary switch and will reset after being pressed.
The burners will cycle on and off throughout the melt cycle. When the fry tank oil
reaches 135° F the burners will stop cycling and remain on until the set temperature
is reached. Once set temperature is reached the burners will cycle on and off to
maintaining the set temperature.
TURNING OFF THE FRYER
Open the door to the fryer. Press the power switch to the OFF position.