Vulcan-Hart GDC72 ML-52585 Cooktop User Manual


 
— 10 —
After Each Use
Clean the griddle with a flexible spatula or griddle scraper. Take care not to contact the platen surfaces
as these can be easily scratched, shortening the life of the coating and promoting sticking.
During The Day
Flush the hot griddle with water and scrape with griddle scraper to reduce carbonized grease build-up.
Follow by a light coating of oil to prevent product sticking.
Periodically inspect the grease container. As necessary, remove the grease container, empty it, and
wash it out in the same manner as any ordinary cooking utensil.
Once A Day
Thoroughly clean backsplash, sides and front. Take care that the integral backsplash is not vigorously
banged with a spatula.
Thoroughly clean and wipe out grease trough in front of griddle. As necessary during use, wipe out
accumulated material to provide good drainage.
Clean the griddle surface thoroughly with water and degreasing cleaner. Rub with the grain of the metal
while the griddle is still warm (not hot). Ensure that the degreasing cleaner is thoroughly removed by
flushing with clear water.
Clean stainless steel and chrome surfaces with a damp cloth and polish with a soft dry cloth. To remove
discolorations, use a non-abrasive cleaner. After each cleaning, the griddle must be reseasoned.
CARE AND CLEANING OF THE PLATEN
The platen surface is furnished with a special non-stick coating. After each use, wipe the surface with
a soft cloth moistened with water. Harsh chemicals or abrasive materials must never touch the surface
of the platen.
Clean platen after each heavy cooking period. Never allow platen to remain uncleaned for extended
periods of time. Cooking residue will become hard, making clean-up difficult.
Do not scrape with spatula or grill scraper. Use a soft damp clean cloth only.
If platen will not be used during low volume hours, wipe the platen with a soft clean damp cloth.
When you shut the griddle down for end-of-day cleaning, clean the platen with a little water and a soft
clean damp cloth.
DO - Use a soft clean damp cloth.
•DO - Use water only as a cleaning agent.
DO NOT - Scrape the platen surface with a spatula, grill scraper or any other hard object. It is not
necessary.