Filter
Top Products
– 9 –
PL-41615
PL-41616
3. While holding the discard hose at the base of the fitting, use your free hand to slide the collar
away from the end of the female fitting (Fig. 12). Align the male and female parts of the quick
disconnect line and push the hose onto the male connector discharge fitting. Release the collar.
Pull the discharge hose away from the fryer to make sure discharge hose is fully inserted and
locked.
Gas Fryer Electric Fryer
Fig. 12
4. Turn the filter power switch ON (Fig. 13).
PL-41613
PL-41614
Gas Fryer Electric Fryer
Fig. 13
5. Place the nozzle in a suitable discharge container. To start the pump, pull the white discard valve
handle out (Fig. 14); the oil begins to flow through the discard hose. If the discharge container
is not large enough for the entire amount, stop the pump by pushing in the white discard valve
handle, empty the container and resume. When the last of the oil is in the discharge container,
stop the pump by pushing in the white discard valve handle, turn the filter power switch OFF and
disconnect the discharge hose (Fig. 15).
6. Clean the filter drawer following the instructions on page 10.
Fig. 14
Fig. 15
PL-41617
PL-41618