Vulcan-Hart GRD25 ML-052513, GRD35 ML-052080, GRD45 ML-052081, GRD65 ML-052082, GRD85 ML-052306, GRC35 ML-052083, GRC45 ML-052084, GRC65 ML-052085, GRC85 ML-052307, GRD35F ML-126732, GRD45F ML-126735, GRD65F ML-126738, GRD85F ML-126741, GRC35F ML-126433, GRC45F ML-12 Fryer User Manual


  Open as PDF
of 36
 
– 31 –
DAILY FILTERING
WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,
CLEANING AND SERVICING THE FRYER.
Filtering Guidelines (All Models)
• Stand alone fryers are available in filter-ready and non-filter-ready versions.
• Battery interplumbing is available only on fryers equipped with KleenScreen.
• A cold fryer will not drain properly. Always filter shortening in a liquid state. The shortening under
the cold zone area will remain hard, even if the heat is on for a few minutes. If necessary, use
the cleanout rod to carefully stir the hard shortening to an area above the cold zone (Fig. 8)
where it will melt.
• Filter shortening at least once a day (see Shortening Life on page 33).
Fig. 8
Filter-Ready Fryers (For Use With Mobile Filter Only)
• The Mobile Filter is covered in a separate instruction manual. Follow the instructions.
 previous next