Filter
Top Products
-
21 -
3. Using water, rinse the Teflon sheet and hardware thoroughly on both sides.
4. Dry the Teflon sheet and hardware using a clean soft cloth.
5. Before reassembling the Teflon sheet to the platen, clean the platen as described in Care and
Cleaning section.
GTS12 ELECTRIC GRIDDLE PLATE STABILIZER
Slide plate stabilizer (fig. 23) onto the bottom handle as shown in fig. 24.
Fig. 23
Fig. 24
GTS12 ELECTRIC GRIDDLE PLATE GAP ADJUSTER
Slide plate gap adjuster (fig.25) onto the bottom handle as shown in figure 26.
Fig. 25
Fig. 26