Filter
Top Products
GAS KETTLES
— 5 —
INSTALL
A
TION
UNPACKING
This kettle was inspected before leaving the factory. The transportation company assumes full
responsibility for safe delivery upon acceptance of the shipment.
Immediately after unpacking, check for possible shipping damage. If kettle damage is found, save the
packaging material and contact the carrier within 15 days of delivery. Freight damage is not covered
under Vulcan Warranty.
INSTALLATION CODES AND STANDARDS
In the United States, Vulcan kettles must be installed in accordance with:
1. State and local codes.
2. National Fuel
Gas
Code, ANSI-Z223.1 (latest edition). Copies may be obtained from the American
Gas Association, Inc.; 1515 Wilson Blvd.; Arlington, VA 22209.
3. National Electrical Code, ANSI/NFPA-70 (latest edition).
4. NFPA Standard NFPA-96, Vapor Removal from Cooking Equipment, latest edition, available
from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
In Canada, Vulcan kettles must be installed in accordance with:
1. Local codes.
2. CAN/CGA-B149.1 National Fuel Gas Code (latest edition), available from the Canadian Gas
Association; 178 Rexdale Blvd.; Etobicoke, Ontario; Canada M9W 1R3.
3. CSA C22.2 No. 3 Canadian Electrical Code (latest edition), available from the Canadian Standards
Association, 178 Rexdale Boulevard, Etobicoke, Ontario, Canada M9W1R3
DRAW-OFF VALVES
Install the draw-off valve, if equipped. Install items 1 thru 5 for the plug style valve or items 1 thru 3
and item 6 for the compression style valve.
3
3
4 6
2
2
1
1
5
PLUG
DRAW-OFF VALVE
COMPRESSION
DRAW-OFF VALVE