Vulcan-Hart ML-126209 Oven User Manual


 
– 9 –
Fig. 2
PL-41175-1
DISPLAY
PROGRAMMABLE
CONTROLS
THERMOSTAT
DIAL
ROTISSERIE
DIAL
MAIN POWER
DIAL
OPERATION
WARNING: HOT GLASS, GREASE, AND PARTS CAN CAUSE BURNS. USE CARE WHEN
OPERATING AND SERVICING THE OVEN.
OVEN CONTROL PANEL (Fig. 2)
DISPLAY — Shows temperature (°F) and time (HH:MM)
when first turned on.
Programmable/Automatic: Colon flashing, remaining
cooking time is shown.
Manual: Nothing will show on the display.
AUTOMATIC CONTROLS — Set all dials on "P". See
pages 10-12 in this manual.
PROGRAMMABLE CONTROLS – Set all dials on "P". See
pages 13-16 in this manual.
MANUAL CONTROLS – Use control dials. Comes with
Programmable Controls only.
Thermostat Dial — 0°F means heat is OFF.
Turn dial to desired temperature (150-480°F
[66°C - 249°C]).
Rotisserie Dial — "0/P" means rotisserie is OFF.
Set Dial Thermostat to desired temperature.
Set the Rotisserie on:
- Oven working without restrictions.
- Only rotor moves.
- Oven working, one lamp remains off.
- Oven working, both lamps remain off.
Set the Main Power dial on the hand symbol.
Operator side heating lamp will remain on until
the desired temperature is reached in oven.
Main Power Dial — "0" means OFF.
Set Main Power dial on the hand symbol.
Set Rotisserie dial to desired manual setting.
Set Thermostat Dial to desired temperature.