Filter
Top Products
– 11 –
Setting an Early Warning Buzzer
Assume roasting time is one hour and fifteen minutes and it is currently 2 o’clock. The cycle completes
and the buzzer will sound at 3:15. If you want an early warning buzzer for basting or whatever reason,
program as follows:
DISPLAY TIME
Press 3:15 — Displays the sum of the current time plus the roasting time.
Press + 3:00 — Buzzer will sound at 3:00.
Press START. — Roasting begins.
• At 3:00, interim buzzer sounds. Press to silence.
• At 3:15, roasting stops and buzzer sounds again. Press to silence.
Setting End Time (Delayed Start)
Assume roasting time is one hour and fifteen minutes and it is currently 2 o’clock. If you want to finish
roasting at 4:00, program the Automatic Control as follows:
DISPLAY TIME
Press 3:15 — Displays sum of current time plus roasting time.
Press + 4:00 — Roasting will stop at 4:00.
Press START. — Red light on the START/STOP button is lit.
Rotisserie stays off until:
• Roasting begins at 2:45. Colon flashes.
• Roasting stops at 4:00; buzzer sounds. Press to silence.
Interrupting an Automatic Cooking Operation
If you want to temporarily interrupt an Automatic Cooking Operation, press START/STOP.
• Red light on the START/STOP button flashes.
• Colon stops flashing.
• Rotisserie stops.
• Heat lamps and elements go off.
• Automatic Control retains the set temperature and the remaining roasting time.
• Current temperature and remaining roasting time are displayed.
• Temperature decreases because heating is off. The control does not compensate.
To restart, press START/STOP again. The Automatic Cooking Operation will resume.
Stopping an Automatic Cooking Operation
When an Automatic Cooking Operation is completed, a buzzer sounds.
If you want to temporarily interrupt an Automatic Cooking Operation, see above.
If you want to abort an Automatic Cooking Operation, turn Main Power dial to "0".
• Temperature and Roasting Time remains in memory, not the remaining cooking time.
Changing A Setting
All settings, except Time of Day, can be changed before, during, or after the cooking process. Time of
Day cannot be changed during an Automatic Cooking Operation. After a change, operation continues
according to new values.