Filter
Top Products
GBD_GBDF SERIES GAS FRYERS
VULCAN-HART F-32934 Rev. B (June 2008)
-22-
Quick Start Guide for Solid State Knob Controls:
Start up in 4 Easy Steps:
Step 1:
Fill fry tank with oil and then turn on the power.
Step 2:
Set temperature knob to the desired set temperature.
Step 3:
Move the MELT switch to the correct shortening being
used: Solid or Liquid.
Step 4:
Press the START switch and fryer will begin to heat.
The burners will cycle on and off through the melt
cycle. When temperature reaches 135° F the
burner will stay on until set temperature is reached.