Filter
Top Products
USING THE JUICE EXTRACTOR
1. Place unit on level, dry surface.
2. Prepare fruits or vegetables. If skin is not removed,
wash well.
3. Cut up fruits/vegetables as necessary to fit into the
feed tube.
4. Make sure stainless steel juice collector cup is in position.
5. Plug in and turn ON.
6. Place fruits/vegetables into feed tube one at a time.
7. Push fruit/vegetable down feed tube with pusher.
NEVER USE YOUR FINGERS. The juice and pulp are
automatically separated. The juice flows out of the outlet
in the pulp collector and into the juice collector cup. If
pulp collector becomes full, switch OFF, remove and
clean out before continuing.
8. Turn OFF and remove plug when finished.
9. If produce is overripe, check to insure that outlet does
not become blocked by very thick juice.
10.This appliance is not recommended for use by children.
11. Note:This unit will not process any type of grass, i.e.
wheatgrass, lemon grass, etc.
CLEANING AND MAINTENANCE
Do not immerse the motor housing in water or spray it
with water. Clean only by wiping with a damp sponge,
cloth or paper towel. Use any liquid dishwashing deter-
gent, but do not use any products containing ammonia
or scouring powders. These products will dull, scratch or
mar the finish.
1. Unplug juice extractor.
2. Take juice extractor apart, following disassembling
instructions. First rinse in cold water, then proceed with hot
water. Wash the pulp collector, feed tube and cover, strain-
er basket, pusher and stainless steel juice collector cup in
hot, sudsy water, or place in top rack of dishwasher.
DO NOT USE A METAL BRUSH OR PAD.
5