Filter
Top Products
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
CAUTION:
ELECTRICAL
SHOCK HAZARD
DO NOT splash or pour water
onto control panel or wiring.
5
PREPARATION
1. Examine hotplate and control panel for condition before turning the
ON/OFF SWITCH "ON". Clean as necessary before use.
2. Turn the ON/OFF SWITCH "ON" and allow the hotplate to pre-heat
for 15 minutes before use .
USE
1. Set the container of pre-heated beverage on the hotplate.
The heating surface of the hotplate is bowl-shaped to safely hold
curved-bottom containers, specifically standard coffee decanters.
2. DO NOT allow the container to run dry. Remove empty containers
from hotplate immediately and allow to cool before reuse.
IMPORTANT:
Avoid storing flammable or combustible materials in, on or near the
appliance.
OPERATION
CLEANING INSTRUCTIONS
PRECAUTIONS: Turn switch OFF and allow to cool before cleaning.
FREQUENCY: Daily
TOOLS: Soft Cloth or Sponge, Mild Detergent,
Plastic Scouring Pad
1. Remove containers from hotplates. Turn ON/OFF SWITCH "OFF".
Allow hotplate to cool completely before cleaning.
2. Wipe hotplate with a soft cloth or sponge moistened with water and
mild detergent.
3. Use a plastic scouring pad to remove any hardened food particles
or mineral deposits. Rub only in the direction of the visible grain
lines.
4. Rinse hotplate by wiping with a soft cloth or sponge moistened with
water.
5. Wipe control panel with a soft cloth or sponge moistened with
water.
Procedure is complete
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns. Allow to cool before
cleaning.
CAUTION:
ELECTRICAL
SHOCK HAZARD
DO NOT splash or pour water
onto control panel or wiring.
IMPORTANT: DO NOT use
steel wool for cleaning.
Keep your stainless steel hot-
plate clean and free from
calcium buildup:
• Use alkaline, alkaline
chlorinated or non-chloride
cleanser.
• Use citric acid-based
cleaners to remove
calcium deposits.