Filter
Top Products
INSTALLATION (continued)
WARNING:
SLIPPING / FALLING
HAZARD
SPILLED OIL
DO NOT OPERATE UNLESS
THE GREASE CUP
TROUGH AND
GREASE DRAWER ARE
INSTALLED.
Oil and moisture will drip onto
the floor and falls may result.
Death or serious injury may
result from slipping and falling
GREASE TROUGH AND GREASE CUP INSTALLATION
1. Install the GREASE TROUGH into the brackets below the grease
baffle.
2. Install the GREASE CUP on the right side of the unit, directly
below the grease trough.
GRIDDLE INSTALLATION
Install GREASE DRAWER in place under the griddle.
Fig. 7 Convection Oven Rack Installation
12
GREASE TROUGH AND GREASE CUP INSTALLATION
1. Install the GREASE COLLECTOR on the pins below the filter
opening.
GRIDDLE INSTALLATION
Install GREASE DRAWER in place under the griddle.
OVEN RACK INSTALLATION
1. Install fan baffle.
Use care around the
fan. The blades are
sharp.
2. Install one rack support
on the fan baffle, and
one rack support on the
left wall of the oven
cavity.
3. Install racks as needed
for the product being
prepared.
Fig. 7 Oven Rack Installation
509 305936 OpM WVOC-G136