TROUBLESHOOTING SUGGESTIONS
27
SYMPTOM POSSIBLE CAUSE RECOMMENDED REMEDY
No power to unit Not plugged in or circuit breaker
tripped
Plug unit into power receptacle
Reset circuit breaker
Cooking appliances not
energized
Filters not properly installed
(CHECK FILTERS lit)
Install filters properly
Filters expended
(SERVICE REQUIRED lit)
Replace filters
Ansul® system discharged or not
cocked. (Buzzer sounds)
Contact Ansul® Distributor for
service.
Internal damage Contact Authorized Wells Service
Agent for repairs.
Fryer (only) will not heat Fryer Power Switch not ON Press Fryer Power Switch to ON
Fryer Temperature Control not set Set Fryer Temperature Control to
desired temperature.
Internal damage Contact Authorized Wells Service
Agent for repairs.
Griddle (only) will not heat Griddle Temperature Control not
set
Set Griddle Temperature Control
to desired temperature
Internal damage Contact Authorized Wells Service
Agent for repairs.
Warmer Drawer will not heat Drawer Temperature Control not
set
Set Drawer Temperature Control
to desired temperature
Internal damage Contact Authorized Wells Service
Agent for repairs.
Fryer trips Hi-Limit Safety of oil
temperature fluctuated greatly
Element needs cleaning Circulation of oil around
thermobulbs required for proper
operation. See page 21 for
cleaning instructions.