Filter
Top Products
INSTALLATION (continued)
WARNING
Slipping / Falling
Hazard
Spilled Oil
DO NOT OPERATE UNLESS
THE GREASE CUP
TROUGH AND
GREASE DRAWER ARE
INSTALLED.
Oil and moisture will drip onto
the floor and falls may result.
Death or serious injury may
result from slipping and falling
GREASE TROUGH AND GREASE CUP INSTALLATION
1. Install the GREASE TROUGH into the brackets below the grease
baffle.
2. Install the GREASE CUP on the right side of the unit, directly
below the grease trough.
GRIDDLE INSTALLATION
Install GREASE DRAWER in place under the griddle.
ROLL WARMER INSTALLATION
1. Install roll warmer drawers in drawer slides.
2. Place appropriate one drawer insert pan into each warmer drawer.
If used, place one Humitrol rack into each drawer pan.
Humitrol
Rack
Drawer
Insert
Pan
Fig. 7 Roll Warmer Drawer Pan Installation
12