Filter
Top Products
USING YOUR “SINGLE SERVER”
Permanent Filter
Pod/Filter Holder
Server
Before using your “Single Server,” clean the entire appliance according to the
cleaning instructions. Wash all loose parts in warm, soapy water, rinse thoroughly
and dry. To remove any manufacturing residuals that may reside in the appliance,
we recommend making at least one full cup of water and discarding the water when
complete.
1. Place the appliance on dry, level, heat-resistant surface, away from any edge.
2. Plug cord into a 120 volt, AC electric outlet only.
3. Add cold water to the reservoir. Note: The maximum capacity of the “Single
Server” is 12 fluid oz. (1½ cups). Never put more than this amount into the
reservoir or the water will overflow.
4. Position the pod/filter holder and permanent filter, if needed, in place. Add the
coffee pod, coffee grounds or tea.
5. Set a cup in place on the “Single Server.” Note: Make sure the cup is suitable
for hot liquids.
6. Press the “START” button and allow the machine to turn off automatically before
removing the cup.
• A small amount of smoke and/or odor may occur upon heating due to the
release of manufacturing oils – this is normal.
• Some minor expansion/contraction sounds may occur during heating and
cooling – this is normal.
4