West Bend SINGLE SERVE COFFEEMAKER Coffeemaker User Manual


 
5
A small amount of smoke and/or odor may occur upon heating due to the
release of manufacturing oils – this is normal.
Some minor expansion/contraction sounds may occur during heating and
cooling – this is normal.
POD COFFEE BREWING – Any standard single serve Pod will work.
Using the Pod/Filter Holder, Place one or two pods (to taste) into the Pod/Filter
Holder. Pack the Pod(s) tight to the bottom of the holder. Using the desired cup size
as your measure (maximum 12 oz.), add cold water to the Server reservoir. Set your
cup in place on Server and press the Start button. Brewing will complete in
approximately 2-3 minutes.
GROUND COFFEE BREWING - Use standard drip grind coffee.
Place the Permanent Filter into the Pod/Filter Holder and position into the Server.
Using the coffee measure, add a heaping measure of grounds into the filter. Using
the desired cup size as your measure (maximum 12 oz.), add cold water to the
Server reservoir. Set your cup in place on Server and press the Start button.
Brewing will complete in approximately 2-3 minutes. Note: Adjust the amount of
grounds to taste.
TEA BREWING – BAGS
Place one tea bag into your cup and set in place on Server. Add ¾-cup (6 oz.) of
cold water to Server. Press the Start button. When brewing is complete
(approximately 2 minutes), allow to steep for three minutes or to taste. Note: Adjust
the amount of water to taste.
TEA BREWING – LOOSE
Place the Permanent Filter into the Pod/Filter Holder and position into the Server.
Using the coffee measure, add a heaping measure of loose tea into the filter. Using
the desired cup size as your measure (maximum 12 oz.), add cold water to the
Server reservoir. Set your cup in place on Server and press the Start button.
Brewing will complete in approximately 2-3 minutes. Note: Adjust the amount of
loose tea to taste.
OATMEAL
Place contents of one single serve instant oatmeal package (approximately 1½ oz.
or 43g), into 12 oz. cup and set in place on Server. Add ½-cup (4 oz.) of cold water
to Server reservoir. Press the Start button. When brewing is complete
(approximately 2 minutes), stir contents to desired consistency and allow to steep for
an additional 1 or 2 minutes. Add sugar and/or milk if desired. Note: If using bulk
packaged instant oatmeal, use ½ cups of oats and 1-cup (8 oz.) of water. Adjust the
amount of water to taste and desired consistency.