Westinghouse WST3001BLK Toaster User Manual


 
29
ADDITIONAL IMPORTANT SAFEGUARDS
CAUTION HOT SURFACES:
This appliance generates heat and escaping steam during use. Proper precautions must be taken to
prevent the risk of burns, fires, or other injury to persons or damage to property.
1. A person who has not read and understood all operating and safety instructions is not qualified
to operate this appliance. All users of this appliance must read and understand this Owner’s
Manual before operating or cleaning this appliance.
2. Unplug from outlet when not in use and before cleaning. To avoid electric shock, never immerse
or rinse this appliance in water or any other liquid.
3. If this appliance falls or accidentally becomes immersed in water, unplug it from the wall outlet
immediately. Do not reach into the water! Do not use this appliance after it has fallen into or
becomes immersed in water.
4. When using this appliance, provide adequate air space above and on all sides for air circulation.
Do not operate this appliance while it is touching or near curtains, wall coverings, clothing,
dish towels or other flammable materials.
5. To reduce the risk of fire, do not leave this appliance unattended during use.
6. If this appliance begins to malfunction during use, immediately press the CANCEL button and
unplug the cord. Do not use or attempt to repair a malfunctioning appliance!
7. The cord to this appliance should only be plugged into a 120V AC electrical wall outlet.
8. Do not use this appliance in an unstable position.
9. Use the Toaster on a hard, flat surface. Do not place it near a flame or heat or on a soft surface
(such as carpet). Avoid placing it where it may tip over during use. Dropping the Toaster could
cause it to malfunction. If this appliance begins to malfunction during use, immediately
press the CANCEL button and unplug the cord. Do not use or attempt to repair the
malfunctioning appliance.
10. Do not use this appliance for other than intended use.
11. Operate the appliance only when the Blade-Release Cap is properly engaged and tightened.
12. Handle the blade carefully when cleaning, removing and inserting, as the Blade is extremely
sharp. Do not touch the sharp edge of the Blade. Do not use or install the Blade in any way other
than recommended in this manual.
NOTES