Filter
Top Products
The Key Eject lock...
can help reduce the hazard of child
entrapment:
To lock or unlock the freezer you must hold the
key in the lock while turning. The lock is spring
loaded so the key cannot be left in the lock.
lfthe key is lost, contact your WHIRLPOOL dealer
for a replacement. Always give the complete
model and serial number of your freezer when
requesting a replacement key.
Freezer Shelves...
Then the back
---
To remove:
Lift front slightly, then lift shelf from back supports.
To replace:
Set back of shelf on rear supports then lower
the front on to front mounts.
Boti
l
Insert into rear slides.
To remove:
0 Lower into place.
l
Lift up, then pull out. 0 Push basket into freezer
4
Changing light Bulb...
1. UnplLig power cord.
2. Remc.ve light shield by pulling away from the
side ‘,‘/all.
3. Repl(;ce bulb with 40 watt appliance bulb.
4. To ret )lace shield, insert tabs into slots in wall
and f ress.
Removing the Base Grille . . .
l
Open he door.
l
Lift up .In two tabs showing through grille.
Lift up rh
grille-ho
l
Swing the top of the grille forward.
l
Lift grilie off bottom supports.
I \
Swina out:
lift up
l
Replal::e in reverse order.
l
Do not remove Tech Sheet fastened behind
the grille.