Whirlpool 288 Oven User Manual


 
Using your oven
Automatic MEALTIMER* Clock
Start Time Knob
Adjustable
Oven Selector
Oven Temperature Control
/
/
\
I
Minute Timer
Stop Time Knob
Manual Oven tight Switch
Oven Signal tight
SETTING THE CONTROLS
5. Put food in the oven.
6. When done baking, turn both knobs to
OFF.
Durlng baking, the elements will turn on
and off to help hold the oven temperature at
the setting. (The top element will never turn
red, but will be hot.) The Signal light will turn
on and off with the elements.
Does your new oven seem to be hotter or colder at the same settings than your
old oven? The temperature setting in your old oven may have changed gradu-
ally over the years. The accurate setting of your new oven can seem different.
If you think the oven temperature needs adjusting, follow these steps:
4. Pull out the center
of the Oven Tem-
perature Control.
OFF
OFF
Locking Screw
Tooth
Notches
2. Loosen the lock-
3.
To lower the tem-
rng screw.
perature, move
Tooth
Notches
4. To raise the tem-
perature, move black
DlaCk rlng so tootn IS
ring so tooth is
closer to LO. Each closer to HI. Each
notch equals notch equals
about 10 F (5 C). about 10 F (5 C]
OFF
4
Tighten the locking screw. Replace the knob.
‘Tmk