Filter
Top Products
5
Installing Your Refrigerator
wWARNING
Electric Shock Hazard
Disconnect the power to the refrigerator before
performing any installation steps.
Failure to follow this instruction can result in
death or electrical shock.
When you are installing your refrigerator, allow
1
⁄2-inch
(1.25cm) of space on each side and at the top of the
refrigerator for ease of installation. It can be flush
against the back wall. Be sure to wear gloves while
installing the refrigerator.
Cleaning your refrigerator
Removing packaging materials
Remove tape and any inside labels (except the model
and serial number label) before using the refrigerator.
To remove any remaining tape or label glue:
• Rub briskly with thumb.
OR
• Apply liquid hand-dishwashing detergent or tooth-
paste to area before removing glue as described
above. Do not use sharp instruments, rubbing alco-
hol, flammable fluids, or abrasive cleaners. These
can damage the material. See “Important Safety
Instructions” on page 3.
NOTE: Do not remove any permanent instruction
labels inside your refrigerator. Do not remove the
Tech Sheet fastened under the refrigerator at the
front.