Filter
Top Products
EN10
DETAILS OF FUNCTION
After selecting the desired function, press button and the display will show further options and related
details.
PREHEAT
No
GRILL POWER
Medium
COOK TIME
END TIME
Grill
--:--
--:--
Zone 1 Zone 3
Cursor
Zone 4
Zone 2
To move between different areas, use buttons and : the cursor moves to the adjustable values,
following the order described above. Press
to select the value, adjust it using and confirm by
pressing button
.
USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND SETTING
THE TIME
For correct use of the oven, when it is switched on for the first time you will have to select the desired
language and set the correct time.
Proceed as follows:
1. Press
: the display will show the list of the first three available languages.
2. Press buttons
and to scroll down the list.
3. When the desired language is highlighted, press
to select it.
After language selection, the display will flash 12:00.
4. Set the time using buttons and . To scroll through the numbers more quickly, keep the button
pressed.
5. Confirm your setting by pressing : the display will show the list of functions.
SELECTING COOKING FUNCTIONS
Traditional manual cooking functions
Specials
Recipes
Traditional
1. If the oven off press button ; the display will show the cooking functions.
2. To browse the various possibilities, press buttons : the selectable function is highlighted in
white in the centre of the screen.
N.B.:for the list and description of functions, see the specific table at page15 and at page16.
3. Select the function by pressing button
: the cooking settings are displayed on the screen. If the
pre-set values are those desired, press the start button
, otherwise proceed as indicated above to
change them.
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL
PREHEAT
No
TEMPERATURE
200°C
COOK TIME
END TIME
Forced Air
--:--
--:--
PREHEAT
No
TEMPERATURE
180°C
COOK TIME
END TIME
Forced Air
--:--
--:--
Insert food on level 3
Press when done
To change the temperature or output of the grill, proceed as follows:
1. Check that the cursor is positioned next to the temperature value (zone 1); press button
to select
the parameter to be changed: the temperature values flash.
2. Use buttons
to change to the desired value.
3. Press button
to confirm and then press . The display indicates which shelf food should be
placed on.
4. Press
to start cooking.
The set temperature can also be changed during cooking by following the same procedure.
5. At the end of cooking, the end of cooking message is displayed. At this point the oven can be
swit
ched off by pressing
, or cooking can be prolonged by pressing . When switched off,
the display shows the cooling bar which indicates the temperature inside the oven.