Filter
Top Products
Using Your Refrigerator
Continued
Changing the light bulbs
a--
5
q
‘L
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main power
supply. Shock and injury can occur if elec-
tricity remains connected.
To change refrigerator light:
I. Disconnect refrigerator from power supply.
2.
Reach behind the Control Console to find
bulb(s).
3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
Reversing the door swing
You can change the hinges on your refrigerator so
the doors open the other way. Refer to the instruc-
tions sheet included with your refrigerator.
Ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.