Filter
Top Products
Remove the
glass
insert. Lift frame
front, then the ba
Removing the crispers and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop, lift
front, then slide the rest of the way out.
2. Replace in reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove cover support.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator, then lower front into place.
2. Insert cover support (with the long tab toward
the front) into the groove on the underside of
the crisper cover.
NOTE: If support needs adjustment, turn base
clockwise to raise or counterclockwise to lower.
3. Slide back of glass insert into place, then
lower front.