Filter
Top Products
For Best Results
Continued
Energy saving tips
You can help save energy if you:
1. Wash full loads. Running a half-filled dish-
washer uses the same amount of electricity and
hot water as a fully loaded machine.
2. Use the Light Wash Cycle for moderately
soiled loads. It uses less hot water and
energy than the Normal Wash Cycle.
3. Air dry dishes when you don’t need a rapid
drying cycle. Allow longer drying times (over-
night). Use a rinse agent to improve drying.
4. Load correctly for best washing results.
Incorrect loading may cause poor washing and
the need to rewash all or part of the load.
5. Do not pre-rinse normally soiled dishes.
Select the correct cycle for the load and use the
recommended amount of detergent for good
washing results without hand rinsing.
6. Use your dishwasher during off-peak hours.
Local utilities recommend this to avoid heavy
usage of energy at certain times of day.
Dishwasher care 8 cleaning
Exterior - Regular use of a soft, damp cloth or
sponge and a mild detergent is all that is neces-
sary, in most cases, to keep the outside of your
dishwasher nice looking and clean.
Interior - Hard water minerals may cause a white
film to build-up on the inside surfaces, especially
just beneath the door area. To clean dishwasher
interior:
1. Apply powdered dishwasher detergent to a
damp sponge to make a paste.
OR
2. Use liquid automatic dishwasher detergent and
clean with damp sponge.
Wear rubber gloves. Do not use any type of
cleanser other than automatic dishwasher de-
tergent because it may cause foaming or sudsing.
Filter Screen -The filter system requires
periodic cleaning as needed. To clean screen:
Personal Injury Hazard
Wait at least 20 minutes after a cycle for the
heating element to cool down. Failure to do
so can result in burn injuries.
1. Unload and slide bottom rack forward. (Remove
bottom rack if necessary to reach filter screen.)
2. Remove collected particles from the screen with
your fingers or paper towel.
3. Return bottom rack to original position.
12