Filter
Top Products
Changing a cycle setting
You can change a setting anytime during any
cycle.
1. Lift up on the door latch to unlatch the door and
stop the cycle. Do not open the door until the
spray arms stop spinning.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle. When changing the
dial from LIGHT WASH to POTS & PANS, or
NORMAL WASH setting, detergent is released.
Reload covered section of dispenser before
starting Pots & Pans or Normal Wash Cycles.
4. Close and latch the door. The dishwasher will
automatically start the new cycle.
Changing an option
If you want to change a selected option, push the
RESET OPTIONS Button. Re-select an option,
if desired.
c