Filter
Top Products
EN16
2. To browse the various possibilities, press buttons : the selectable function is highlighted in
white in the centre of the screen.
N.B.:for the list and description of functions, see the specific table at page18 and at page23.
If the induction plate is already properly engaged or whenever the induction plate is inserted,
only Induction Functions and Settings will be accessible through the main menu.
If the induction plate is not engaged into the oven, both standard functions MENU and
induction functions MENU will be accessible.
When the induction plate is inserted or removed, a message indicating correct engagement/
disengagement will be shown on the display.
3. Select the function by pressing button : the cooking settings are displayed on the screen. If the
pre-set values are those desired, press the start button , otherwise proceed as indicated above to
change them.
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL (Standard Functions only)
To change the temperature or output of the grill, proceed as follows:
1. Check that the cursor is positioned next to the temperature value (zone 1); press button to select
the parameter to be changed: the temperature values flash.
2. Use buttons to change to the desired value.
3. Press button to confirm and then press . The display indicates which shelf food should be
placed on.
4. Press to start cooking.
The set temperature can also be changed during cooking by following the same procedure.
5. At the end of cooking, the end of cooking message is displayed. At this point the oven can be
switched off by pressing , or cooking can be prolonged by pressing . When switched off, the
display shows the cooling bar which indicates the temperature inside the oven.
Note: in induction mode temperature will be automatically adjusted by the oven and does not need
to be manually set.
PREHEATING THE OVEN (Standard Functions Only)
If you wish to preheat the oven before inserting food, change the oven’s default selection as follows:
1. Using buttons and , move the cursor to preheating.
2. Press button to select the setting: “No” flashes on the display.
3. To change the setting, press or : the display shows “Yes”.
4. To confirm your choice, press button .
Note: in induction mode, preheating is not required. Induction mode requires all cooking operations
to have a cold start.
FAST PREHEATING (Standard Functions Only)
If you wish to preheat the oven quickly before inserting food, change the oven’s default selection as
follows:
1. Select the fast preheating function using buttons .
PREHEAT
No
TEMPERATURE
200°C
COOK TIME
END TIME
Forced Air
--:--
--:--
PREHEAT
No
TEMPERATURE
180°C
COOK TIME
END TIME
Forced Air
--:--
--:--
Insert food on level 3
Press when done
PREHEAT
No
TEMPERATURE
180°C
COOK TIME
END TIME
Forced Air
--:--
--:--
PREHEAT
No
TEMPERATURE
180°C
COOK TIME
END TIME
Forced Air
--:--
--:--
PREHEAT
Yes
TEMPERATURE
180°C
COOK TIME
END TIME
Forced Air
--:--
--:--
TEMPERATURE
180°C
INSERT IN
Fast Preheating
- 00:02
TEMPERATURE
180°C
INSERT IN
Preheating
- 00:02
TEMPERATURE
180°C
INSERT IN
Oven is Hot!
- 00:02