Filter
Top Products
To
reinstall shelf:
1.
Hold shelf at front and back.
2. Tilt front of shelf up to a 45” angle to
track.
3. Insert both rear shelf slides into upper
channel of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides
are securely in the track before letting go
of shelf.
Upper channel
, of track
Insert rear shelf
slides into
upper channel
of track.
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy
food items.
To
remove
glass shelves:
1.
Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To
replace glass shelves:
1.
Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Glass shelves are
heavy. Be careful.
Removing the meat drawer and cover
To remove the meat drawer:
1.
Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
4. Replace cover in reverse order.
Pull out to the stop,
lift the front and pull
again.