Filter
Top Products
Removing the crispers and crisper cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3.
Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1.
Replace metal cover support on wall
supports in front section of cabinet.
2. Fit back corners of cover frame into notch
supports on walls of refrigerator, then
lower front onto metal cover support.
3. Slide back of glass insert into cover
frame. Then lower front to level position.
Pull out to the
stop, lift the front
and pull again.
Remove the
glass insert.
Lift front of
cover frame,
then the
back.
Adjusting the crisper humidity control
You can control the amount of humidity in
the moisture-sealed crisper.
l Adjust the control to any setting between
LOW and HIGH.
l LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
l HIGH (closed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
12